| View previous topic :: View next topic |
| Author |
Message |
Mikael(SWE)
Guest
|
 Posted: Sat Dec 15, 2001 12:24 am Post subject: |
 |
|
Hi, I am about to turbo convert my 924 NA and I will weld my own manifold, is there anyone who has something like a drawing or just the data on how the drilling patterns are.. I would do as much work as possible before I dissasambe the engine, and as I have done it before... I know what a hell it is to remove the exhaust manifold..
/Micke
|
|
| Back to top |
|
 |
John H
Guest
|
| Posted: Mon Dec 17, 2001 8:44 am Post subject: |
|
|
easiest way would be to try and find an early (about 1970's vintage) Audi 100 exhaust manifold - if your turn their manifold around the other way they fit and are similar in style to the 931 manifold.
I know a guy who did this to his 924 N/A - exhaust outlet faces forward making it easy to get exhaust gas to the turbo.
Otherwise obtain an exhuast gasket and use this as a pattern. |
|
| Back to top |
|
|
admin
Joined: 29 Jul 2001
Posts: 66
Location: Everywhere
|
| Posted: Mon Dec 17, 2001 6:24 pm Post subject: |
|
|
| use the thread in the Performance Upgraded forum. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
