| View previous topic :: View next topic |
| Author |
Message |
vdub6v
Joined: 07 Jul 2016 Posts: 41 Location: West Chester, PA 19382
|
Posted: Fri Jan 03, 2020 6:30 am Post subject: Salox CIS rebuild kit HOW MUCH LOCTITE?! |
|
|
http://salvox.com/info.php?articles&articles_id=7
I'm going to use one of these kits and can't find a good indication of how much loctitie 542 to use on the cast iron distributor halves. Obviously don't want to create a clog. Do I smear it just around the outer edge or do I run it between each cavity? |
|
| Back to top |
|
 |
Fifty50Plus

Joined: 28 Feb 2008 Posts: 1422 Location: Washington DC area
|
Posted: Fri Jan 03, 2020 7:20 am Post subject: |
|
|
I put it sparingly on both halves and scrape it with a razor blade so that it's very thin on both halves. Keep it out of the holes. _________________ 1979 924 NA race car H-Prod SCCA
1982 924 NA race car - Sold
1981 924 Turbo sold
1982 924 Turbo sold
1972 911 E race car - traded for Cayenne Diesel
1975 914 1.8 Building for H-Prod SCCA |
|
| Back to top |
|
 |
|