 |
924Board.org
Discussion Forum of 924.org
|
| View previous topic :: View next topic |
| Author |
Message |
Carrera RSR
Joined: 08 Jan 2010
Posts: 2312
Location: Somerset, UK
|
 Posted: Sun May 12, 2013 8:48 am Post subject: How long is the LHD 931 S2 throttle cable? |
 |
|
Can someone measure the outer cable cover for a LHD 931 S2 throttle cable please.
The RHD version is a touch too long for my modified TB position and I know the LHD is shorter, but by how much? It may still be too short for my use and need to fab up a custom cable.
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252 |
|
| Back to top |
|
 |
Grenadiers
Joined: 20 Feb 2007
Posts: 3222
Location: Nelson, WI & Prescott, AZ
|
| Posted: Sun May 12, 2013 9:07 am Post subject: |
|
|
I was just looking at your new manifold/TB, did you bore a couple holes in it to mount the stock cable bracket? If so, which one did you use, the shorter Series II, or the longer series I bracket? You might need to use the Series I throttle 'arm' versus the Series II 'cam' in combination of either bracket.
_________________
'83 944 Track car.
'88 924S Track car.
'89 944 Turbo
2004 Winnebago Vectra monster RV
2012 Jeep Wrangler
2014 Kia Soul
2001 Ford F350 powerstroke |
|
| Back to top |
|
|
Carrera RSR
Joined: 08 Jan 2010
Posts: 2312
Location: Somerset, UK
|
| Posted: Sun May 12, 2013 6:14 pm Post subject: |
|
|
| Grenadiers wrote: | | I was just looking at your new manifold/TB, did you bore a couple holes in it to mount the stock cable bracket? If so, which one did you use, the shorter Series II, or the longer series I bracket? You might need to use the Series I throttle 'arm' versus the Series II 'cam' in combination of either bracket. |
Neither. The RHD cars use different brackets as the cable starts in a different place. Just need a shorter cable than I have below and the LHD cable is listed as being shorter, but I need to know how short before I order one
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252 |
|
| Back to top |
|
|
Buwani 931
Joined: 31 May 2004
Posts: 308
Location: Napa California
|
| Posted: Mon May 13, 2013 1:53 am Post subject: |
|
|
Here is a shot of a lhd s2 cable.
Sorry, no metric tape here. This is from where the casing would end, inside the ferrule.About 10 1/2 inch to the firewall lip. Let me know if you need any other shots or measurements.
Shawn
_________________
1980 931
That's thirty minutes away. I'll be there in ten. |
|
| Back to top |
|
|
Carrera RSR
Joined: 08 Jan 2010
Posts: 2312
Location: Somerset, UK
|
| Posted: Mon May 13, 2013 2:10 am Post subject: |
|
|
Thanks Shawn. Somehow I thought it would be bigger! Off to get a custom one made then
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252 |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
