924Board.org

Guest · Posted: Wed Jul 04, 2001 12:51 am Post subject:

From: Mike K
Email: Kouridakis@msn.com
Date: 04 Jul 2001
Time: 00:51:55

How do I get the injectors out? No matter how I arrange the wrenches the ridgid fuel line twists with the top nut. Is there a trick. I sprayed them with WD40 a few hours ago. Maybe that will do the trick. Any ideas?
Mike

Guest · Posted: Wed Jul 04, 2001 4:07 am Post subject:

From: ian
Email: badenkb@hotmail.com
Date: 04 Jul 2001
Time: 04:07:30

HI

I think 931 injectors are the screw type whilst standard 924 injectors are the push in type.

Ian

Guest · Posted: Wed Jul 04, 2001 6:24 am Post subject:

From: Mike K
Email: Kouridakis@msn.com
Date: 04 Jul 2001
Time: 06:24:56

Ian, They are the screw-in type. The problem is that I can't seem to unscrew them without twisting the ridgid fuel line. Mike

Guest · Posted: Wed Jul 04, 2001 10:46 am Post subject:

From: JoeD.
Email: jod3511@home.com
Date: 04 Jul 2001
Time: 10:46:16

Take off your fuel lines you dont want to break them and put them back on if your testing your injectors I have the push in pull out kind...

Guest · Posted: Wed Jul 04, 2001 11:23 am Post subject:

From: larso
Email: l_porsche@hotmail.com
Date: 04 Jul 2001
Time: 11:23:41

Yah you gotta hold the actual injector with a wrench, and take the fuel line spindle nut off first...the fuel lines come right off and you can moce em out of the way...watch you don't slam your knuckles when taking them off, i always do they are a little "stuck" i guess because of heat expansion and contraction of the hot cyl head head and what not which makes em bond together.