924Board.org

Guest · Posted: Wed Mar 15, 2000 1:12 pm Post subject:

From: Jim
Email: jimndawn@ametro.net
Date: 15 Mar 2000
Time: 14:12:15

My '82 924 appears to not be getting signal to the fuel pump. The jumper test provides power. The relay has been changed (new style). Continuity is good between T1 on the coil and T1 in the relay, although no voltage is showing during cranking. Any suggestions? Thanks, Jim

Guest · Posted: Thu Mar 16, 2000 8:09 pm Post subject:

From: Pat Nelson
Email: euro77@ix.netcom.com
Date: 16 Mar 2000
Time: 21:09:28

Hey Jim,

The only thing that comes to mind is the fues block or "and I know this is a long one but" your CD unit it self. This is a hard one for sure. I would rebild my motor rather then hunt down an electic problem. Sorry I wish I could have been more help.

Guest · Posted: Fri Mar 17, 2000 11:06 am Post subject:

From: jim
Email: jimndawn@ametro.net
Date: 17 Mar 2000
Time: 12:06:18

Thanks, Pat.
I was finally able to trace down a bad ground wire at the relay board, where it plugs in. Then, the new relay was bad. Fortunately, I had an old one, which worked. I really appreciate your response. Having a "brain trust" to go to has been a real asset.
--Jim--