| View previous topic :: View next topic |
| Author |
Message |
ted von Kampen
Joined: 14 Oct 2016
Posts: 183
Location: Scottsbluff, Nebraska
|
 Posted: Sat Apr 15, 2017 6:11 am Post subject: 924 power window wiring routing |
 |
|
I am working on my 1981 Porsche 924 with power electric windows and power mirrors. I am working on the power window regulator and in the process I noticed the wiring for the power mirror has a strange routing. It comes out of the round inside steel door structure, goes over the steel door structure for about 6 inches and back into the large rectangular hole and then into the door-to-pillar hole and boot. My question is: is this the correct routing outside the inner door steel and sandwiched between the door card and the inner door steel? Doesn't seem logical or correct to me.
If not correct what is the proper routing?
Comments welcome,
Thanks,
Ted |
|
| Back to top |
|
 |
Tiny
Joined: 10 Apr 2006
Posts: 502
Location: London, UK
|
| Posted: Sat Apr 15, 2017 8:57 pm Post subject: |
|
|
it's correct
_________________
*****1981 - 924 - Auto - London, UK****** |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
