924Board.org

[ideola]

Aftermarket replacement for stock lower charge tube bracket:


Here y'go boys, we now have a replacement for the NLA lower charge tube bracket that always goes missing. These were plasma cut. The machinist cut the holes with plasma too instead of using a drill press, which would have been more cosmetically pleasing. However, these are based off of the a stock part, so they are essentially identical in terms of geometry. These items have NOT been treated, so you should probably plan to paint, prime, powder coat, or Cad-Di-Chromate them. They are made from .125" mild steel stock.

Since these aren't 100% up to my expectations in terms of cosmetics, I'm going to offer the first five units at a much lower price than I originally planned. $12 each, plus shipping. If there's enough demand, I'll do another run and have the bolt holes drilled rather than cut. If interested, send PM with email address and shipping address.
_________________
erstwhile owner of just about every 924 variant ever made

[ideola]

Bump. Still available.
_________________
erstwhile owner of just about every 924 variant ever made

[Crux Mason]

I am gonna want one sooner or later but sadly enough I just don't have an extra 12 bucks right now.