924Board.org

[Monte GTS]

Hi there, final prep parts before my 931 based Carrera GTS spec rally car goes for paint at the end of the month and wanted to see if anyone has any images of how they have mounted the CGT bumper..

Do the three tabs along the top of the bumper bolt downwards into the specific CGT fiberglass cross piece that sits behind the bumper? or do they bolt upwards directly to the underside of the nose panel?

I have the factory exploded diagrams but I maybe being a bit dull and can't get my head around it.. Thanks in advance for your help and images..
_________________
924 Turbo - FIA Historic Spec Carrera GT/S rally
924 Turbo - MY79 FIA Historic Spec Grp 4 rally
924 Turbo - MY79 S1 original two tone diamond silver / dolphin grey upper
958 Cayenne V8 TT

[fblade]

If its a full on rally car i would suggest doing it the way it's easiest to get the bumper off to get to what ever is behind it just in case you run out of road and talent like i did a few times.

Would love to see some pictures of the car