924Board.org

B2524 · Joined: 02 Oct 2021 Posts: 15 Location: Templeton CA

I have a 77 924. I’m wondering if anyone has eliminated the steel line coming from the water pump that supplies water to the heater and branches off to the temp senders and the back of the head?
Is it needed to cool the head or just for flow to the sensors so they see the temp?
Thanks.
_________________
It’s a sickness.

safe · Joined: 18 Mar 2017 Posts: 587 Location: Sweden

Yes its needed, its the return from the head.
_________________
/Magnus, Stockholm Sweden
=======================
Porsche 924 -79 NA, EFI and Turbo.
Porsche 931 -79
Porsche 911 -77, 3.2 Targa
Porsche 911 -69, 3.6, Coupe

Fifty50Plus · Posted: Fri Nov 05, 2021 2:57 am Post subject:

Yes, as Magnus said. It's needed even if you don't use it to feed hot water to the heater core.
_________________
1979 924 NA race car
1982 924 NA race car - Sold
1982 924 Turbo almost a PoS
1981 924 Turbo a real PoS, new engine
1982 924 Turbo nice body, blown engine
1972 911 E race car - going to Vintage
Various 944s to become IT-S race car

MikeJinCO · Posted: Fri Nov 05, 2021 5:06 am Post subject:

On my track car with no heater I eliminated it for a while and it ran fine. But, I have since put it back as it comes from the furthest part of the system so air could easily get trapped back there, at which time bad things could happen. On a SBC they always referred to this line as a steam line.
_________________
Mike

'67 MG Midget Dp
'71 Ocelot Dsr Kawasaki 1000(under rebuild)

Fasteddie313 · Joined: 29 Sep 2013 Posts: 2596 Location: MI

For best head cooling I think the heater core should be bypassed or T’d around..

Definitely not blocked off..
_________________
80 Turbo - Slightly Modified