924Board.org

[prophead]

Hi all,
been a while since I've been on here.

I need to remake my 924 GT fixed headlights so that the beam is adjustable. I can find appropriate 4"x6" light units but am struggling to find a kit / fixings to make them adjustable (from the rear i.e. back of the light). I saw an old post on the forum with this picture but unfortanely there were no details of the light unit of the adjuster screws ect does anyone know what they are from or where I could source them.

Sorry...can post the pic!

I'll post a link to the original....[/img]

http://www.924board.org/viewtopic.php?t=36088&postdays=0&postorder=asc&start=0

the picture i'm refering to is about halfway down.
_________________
924 GT "8 Ball" track car project
944 Lux rolling project, nearly done

[PieszczoH]

look at
https://www.wesem.com/products/front-lamps/168x106-headlamps-for-installation

there are some that have regulations from behind
also those should be better quality that some depo or tyc...
may not be as good as Hellas, but there should be difference in price to it.

models:RE.27031 and RE.27030
and maybe most important it should have E20 homologation....