924Board.org

Have sent a PM.

Cheers.

If it helps I can arrange freight from my side.

Hello.

Does anyone have a good condition crown wheel and pinion from a G31/03 transmission they wish to part with or at least know where I could get hold of them?

I will happily swap with a lowe ...

I have a G31 with LSD which was rebuilt in the US. I was told to use GL5 or MIL-L 2105B.

Was told not to use Swepco or Redline which "eat pinion gears".

Ineteresting. I purchased a 924 similar to this with the same fibreglass front end, fenders and rear fenders. I would say they were Australian in origin.

That car was very rust ridden and had no en ...

Daniel,

You need to be very careful as you can damage the plastic/nylon/acrylic whatever carrier between the shaft and the bearing. A steel tube of just enough internal diameter to go over the stub ...

My car came with an Momo wheel. Even though it is a small diameter it still got in the way of my knees. Installed a extender that can go out up to 50mm and solves all the problems. Problem is I cannot ...

I am not sure whether you have seen this video, but this worked for me.

https://www.youtube.com/watch?v=jbwk991LEfM

This guy has a few really useful videos on early 944s which also relate to 924 ...

As a follow up I revisted the installation in order to tighten the two hex bolts on the coupler. I found that the gearbox side was lined up and the bolt snug but the drive shaft side was about 10mm sh ...

I have just completed the installation of a G31 transmission into a very early 944. I thought this would have relevance to snail shell owners and act as a future reference for myself.

Yes I know p ...

Pelican Parts advise:

The Porsche design is not a perfect circle but rather an oval which was designed to have play in it to prevent load on the transmission.

The holes are round.

Looks like I may make a pair from Teflon if they all come out in strange dimensions.

I have purchased a set of bushes for the shift rod coupling (964-424-223-00-OEM), which is the part number in the 924 parts list, from Pelican Parts.

The problem is that the hole in the bush is lar ...