924Board.org

Head was just rebuilt, Rechecked valves 1.5 weeks ago. Plugs, wires, cap, and rotor were changed at the same time.

I've been trying to richen it slightly everyday to see if it will run better. Ma ...

My 924 Na has a cold running problem. It starts great everytime and idles perfectly. It pops and lacks power at mid throttle until it warms up. If I go full throttle, it will clear up and pull hard. I ...

That is a diffuser from a 944 Turbo. It has a different bumper setup.

Hrmm, the one in Charlotte is right up the road from me. May stop in on my next day off.

YOU'RE CRAZY!!!!!!

Checked my fuel pressures:

Cold: 40 psi
Hot: 54 psi
System: 72 psi

Obviously a problem with the WUR. I took it apart and cleaned it all out and put it back together. Didn't see anything clogg ...

So I check the mechanical timing and found that it was off just slightly due to the tensioner moving the crankshaft pulley when applying tension. Took care of that even though I doubt it was causing m ...

Sorry, NA car. Vacuum leak is possible... I did screw the adjustment screw all the way in and idle only fell to 1k.

About 2 days ago the car started running like shit cold, warm, hot doesn't matter. Did not want to idle. It felt like it was running lean so I richened it and the car ran better but still didn't reall ...

I'm going to need all of your licenses and registrations.

uship.com?

They call them dew strips and I think I've bought mine from pelican or DC auto in the past. I might recommend you buying some new clips as well. The tension in the old clips tends not to be strong eno ...

You said that the timing is right, but that you got a little cough when messing with the vacuum advance?

My question would be, which timing is right? The mechanical or the ignition.

The mechanic ...

I got my early style lock cylinders to work in my script handles without the use of a locksmith. I remember it not being a direct swap, but it wasn't a very hard modification IIRC.

That's them.