| View previous topic :: View next topic |
| Author |
Message |
Goldwolf
Joined: 25 Jun 2017
Posts: 283
Location: Athens,GA
|
 Posted: Sat Oct 05, 2019 12:18 pm Post subject: Vacuum advance distributor hose, where does it go? |
 |
|
I removed my AAR to check a hard starting issue, my AAR is stuck closed, even after visiting the freezer for about 10 minutes. On the search for one of those. But while I was in there I noticed this small piece of hose off the back of the vacuum advance unit of the dizzy. Where should it go? looks like it broke off. Its a side shot, but the cloth braided hose stops where it is in the pic.
Pic of my AAR for fun.
_________________
1981 Weissach Edition #179 |
|
| Back to top |
|
 |
Goldwolf
Joined: 25 Jun 2017
Posts: 283
Location: Athens,GA
|
| Posted: Sun Oct 06, 2019 11:59 pm Post subject: |
|
|
Is that a vacuum retard line? I'm trying to look at parts pictures and they don't seem to have it.
_________________
1981 Weissach Edition #179 |
|
| Back to top |
|
|
Goldwolf
Joined: 25 Jun 2017
Posts: 283
Location: Athens,GA
|
| Posted: Mon Oct 07, 2019 1:29 am Post subject: |
|
|
I found it, it helps having a stream of consciousness on this board.
My plastic hose was poking down behind stuff. Still need an extension because the braided part is not long enough.
You can see the white plastic hose in the back
Overview
My shock rubber mounts need replacing
_________________
1981 Weissach Edition #179 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
