| View previous topic :: View next topic |
| Author |
Message |
ted von Kampen
Joined: 14 Oct 2016
Posts: 183
Location: Scottsbluff, Nebraska
|
 Posted: Wed Aug 30, 2017 9:31 am Post subject: interior side mouldings near windshield |
 |
|
| I am attempting to remove the dash from my 1981 Porsche 924. The instructions say to access the dash side mounting screws remove the interior side moldings that run upward at an angle following the windshield slope from the dash to the upper door/roof molding. Each of these (one per side) has three screw s holding in place. Two are Phillips head but the top one does not seem to be so. Cannot find any thing that fits the top screw so I can unscrew it and remove it. Any clues/suggestions from someone? ...Thanks in advance...Ted |
|
| Back to top |
|
 |
Paul
Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin
|
| Posted: Wed Aug 30, 2017 11:34 am Post subject: |
|
|
All 3 are Phillips if still stock, the top one is at a weird angle.
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.
Last edited by Paul on Wed Aug 30, 2017 11:35 am; edited 1 time in total |
|
| Back to top |
|
|
snakoil
Joined: 09 Feb 2010
Posts: 362
Location: Montreal, Canada
|
| Posted: Wed Aug 30, 2017 11:34 am Post subject: |
|
|
It is a phillips like the other but in a very ackward angle if my memory serves me well.
_________________
1979 924 NA |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
