Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Right hand drive 924 in the US?

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
TonyMechanic  
Guest
PostPosted: Thu Jan 10, 2002 1:49 am    Post subject: Reply with quote
Does anyone out there have a right hand drive 924? I was just curious how they were different (other than the obvious) and if they handled as well as the left hand drive 924s. Thanks
Back to top
kevrl  
Guest
PostPosted: Thu Jan 10, 2002 7:10 am    Post subject: Reply with quote
Mine's a Right Hand Drive 931, they are all RHD here in the UK.
Brake master cylinder is on the same side for LHD and RHD cars, but on the RHD the pedal is linked to the servo by a cross bar. The clutch cylinder is above the Exhaust manifold (header ?) and has a seperate reservoir away from the heat from the exhaust. LHD 931's take their clutch fluid from the brake fluid reservoir. I can't see that any differance in LHD to RHD in the handling aspect, steering column UJ's probebly don't last as long on RHD 'cos they are close to the hot exhaust.

Kevin
(931 - almost intercooled)
Back to top
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group