Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

tranny clunking???

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
Johnny_924S  
Guest





PostPosted: Fri Nov 02, 2001 1:52 am    Post subject: Reply with quote

hey hey its me again, well the car is running and quite well i might add, but ive noticed that when i shift from 2nd to 3rd and somethimes from 3rd to 4th i feel and hear a king of quiet clunk sounds like its comming from the rear end, it only does it sometimes and it is quiet, also it rarly does it on the downshift, like i said i just got it running after it sat for nearly 3 years so would a fluid change help or is this more serious.....thanks johnny
Back to top
Diesel  
Guest





PostPosted: Fri Nov 02, 2001 2:31 am    Post subject: Reply with quote

Could be a CV joint too.
Back to top
Johnny_924S  
Guest





PostPosted: Fri Nov 02, 2001 4:09 am    Post subject: Reply with quote

is there any way to tell (an easy check) if it was the cv joint, how come it only does it in certain gears?
Back to top
cs  
Guest





PostPosted: Fri Nov 02, 2001 4:26 am    Post subject: Reply with quote

does it do it right when the clutch engages. does it do it if you're real easy letting off the clutch. you can try jacking up the rear end and while holding on to the inner cv joint, spin the wheel to see how much play is in the joints
Back to top
Diesel  
Guest





PostPosted: Fri Nov 02, 2001 5:43 am    Post subject: Reply with quote

I had a similar noise recently and I couldn't tell where it was coming from. Dumb luck got me to the CV joint. I was replacing the boots and repacking the joints and I found one joint's ball bearings were galled. Noise gone after I got a new one. By the way, cheapest I found was at Vertex($55). A good one too(Lobro). Odd because they are usually expensive.
Back to top
Diesel  
Guest





PostPosted: Fri Nov 02, 2001 5:49 am    Post subject: Reply with quote

Pretty good web-site you've got, Johnny. Laughed my nuts off.
Back to top
Johnny_924S  
Guest





PostPosted: Fri Nov 02, 2001 7:24 am    Post subject: Reply with quote

hey glad you enjoy the site, it hasnt been updated in a while but its comming along. about the noise from the rear end, if i am really gentle releasing the clutch it will not make the noise. i dont think it makes noise when i depress the clutch but it does sound as if the whole shift liinkage is a bit noisy. like i said it isnt too bad but it is one of those things that really freakes me out espicially since it is my first time driving it.. im lead to elieve that it is my cv joint but anyone out there who has encountered a sisilar problem let me know, much appreciated....johnny
Back to top
John Mueller  
Guest





PostPosted: Sat Nov 03, 2001 7:08 am    Post subject: Reply with quote

I am having the same problem right now. My guess at this point is that you are hearing the suspension arms moving. I am going to check all my bushings and mounts this weekend and I will let you know if that is truly the source of my clunk. My CV's are new/rebuilt so I know they are ok.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group