Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

8 or 10mm hoses from fuel pump to accumulator to engine

 
Post new topic   Reply to topic    924Board.org Forum Index -> 931 Tech.
View previous topic :: View next topic  
Author Message
Geoff123  



Joined: 12 Apr 2021
Posts: 3
Location: The Netherlands

PostPosted: Tue Apr 13, 2021 6:02 pm    Post subject: 8 or 10mm hoses from fuel pump to accumulator to engine Reply with quote

Hi all,

I just started a 924 project from '78 and need to replace the fuel lines, fuel pump and accumulator. I noticed there are standard two fuel lines, one 8mm and one 10mm. Ofcourse the 10mm line goes to the engine but I noticed the fuel line from fuel pump to accumulator is 8mm. And from accumulator to fuel line first 8mm and eventually 10mm. Is this correct?
Thanks!
Back to top
View user's profile Send private message
bear924  



Joined: 26 Jul 2005
Posts: 95
Location: South West Queensland, Australia

PostPosted: Thu Apr 29, 2021 9:20 pm    Post subject: Reply with quote

I replaced my accumulator to engine lines, below is a post with some good information on the pipe.

http://www.924board.org/viewtopic.php?t=41368&start=0&postdays=0&postorder=asc&highlight=cohline

Hope this helps!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 931 Tech. All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group