Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

KKK K26 compressor wheel technical drawings needed please

 
Post new topic   Reply to topic    924Board.org Forum Index -> 931 Tech.
View previous topic :: View next topic  
Author Message
Carrera RSR  



Joined: 08 Jan 2010
Posts: 2309
Location: Somerset, UK

PostPosted: Wed Feb 21, 2018 7:50 pm    Post subject: KKK K26 compressor wheel technical drawings needed please Reply with quote

Anyone have the KKK technical drawings with dimensions for the following compressor wheels?

2470 - have wheel - no KKK drawing
2660 - need wheel - no KKK drawing
2664 - wheel on its way - no KKK drawing
2670 - have wheel - have KKK drawing

They clearly differ in dimensions as the relative compressor housings all have differing part numbers. Would be great to see drawings and physical wheels to see the differences and what parts are potentially interchangeable if at all.

Thanks in advance.......
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252
Back to top
View user's profile Send private message
Dutch924-racer  



Joined: 23 Jul 2007
Posts: 1076
Location: The Netherlands

PostPosted: Sat Feb 24, 2018 3:50 pm    Post subject: Reply with quote

What project are you working on ?
_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller
Back to top
View user's profile Send private message
Carrera RSR  



Joined: 08 Jan 2010
Posts: 2309
Location: Somerset, UK

PostPosted: Sat Feb 24, 2018 6:16 pm    Post subject: Reply with quote

Dutch924-racer wrote:
What project are you working on ?


Just want to compare wheels out of curiosity. Dimensions. Shapes. See what differences exist. Check if my existing wheel is as the re builder said it was, a 2660 or not. Maybe instal the 2670 wheel I have, understand the machining required of the housing. Looking for facts not opinion and hearsay. Will pass on info to Cedric who is doing some efficiency modelling.
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252
Back to top
View user's profile Send private message
gegge  



Joined: 27 Jul 2007
Posts: 1124
Location: Sweden

PostPosted: Sat Feb 24, 2018 7:36 pm    Post subject: Reply with quote

I got a 2660-4.1 turbo on the shelf and can take some measurements, if you want me to but not interested parting/selling the wheel only.
_________________
Carl Fredrik Torkildsen

924 turbo -81 Carrera GT RESTOMOD
924 turbo -80 Dolomite De Luxe
924 -85 DP kit, BBS RS, M030 and tuned engine
924s -86 Black on black turbo with Fuchs
Back to top
View user's profile Send private message
Carrera RSR  



Joined: 08 Jan 2010
Posts: 2309
Location: Somerset, UK

PostPosted: Sat Feb 24, 2018 11:48 pm    Post subject: Reply with quote

gegge wrote:
I got a 2660-4.1 turbo on the shelf and can take some measurements, if you want me to but not interested parting/selling the wheel only.


Measurements and photos would be really helpful please.
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252
Back to top
View user's profile Send private message
gegge  



Joined: 27 Jul 2007
Posts: 1124
Location: Sweden

PostPosted: Sun Feb 25, 2018 1:26 am    Post subject: Reply with quote

2660 compressor wheel

Height of tip: 3,9mm
Height from backplate: ~22mm
Radius of inlet: ~20mm
Thickness of blade: 1,5mm
Inducer: 39,8mm
Exducer: 66,0mm

Note: the backplate is counterbored and the flatback compressorwheel exducer is therefore in level. The 5326-123-2007 and 5326-123-2017 wheels are 5,2mm according to unknown (but trusted) source.

5326-123-2006, 5326-123-2016 & 5326-123-2035 are 7,2mm
5326-123-2010, 5326-123-2019 & 5326-123-2038 are 6,3mm
5326-123-2039 from 951 is unknown but also flatback. Worth to investigate...
5326-123-2201 from 951S is a superback but measure 4,9mm

EDIT: http://www.turbomaster.info/eng/applications/compressor_3k.php
_________________
Carl Fredrik Torkildsen

924 turbo -81 Carrera GT RESTOMOD
924 turbo -80 Dolomite De Luxe
924 -85 DP kit, BBS RS, M030 and tuned engine
924s -86 Black on black turbo with Fuchs
Back to top
View user's profile Send private message
Dutch924-racer  



Joined: 23 Jul 2007
Posts: 1076
Location: The Netherlands

PostPosted: Sun Feb 25, 2018 6:06 am    Post subject: Reply with quote

you will als will find some wheel on Aliexpress, anyone tried them ?

https://nl.aliexpress.com/item/K26-5326-123-2036-39-71-65-94mm-6-6-BLADES-prestaties-turbo-aluminium-2024-frezen/32841399520.html?spm=a2g0z.search0104.3.19.77cd2809OzNhsg&ws_ab_test=searchweb0_0%2Csearchweb201602_5_10152_10151_10065_10344_10068_10342_10343_10340_10341_10084_10083_10618_10630_10304_10307_10301_5722316_5711213_10313_10059_10534_100031_10103_10627_10626_10624_10623_10622_10621_10620_5711313_10142%2Csearchweb201603_25%2CppcSwitch_5&algo_expid=e07e24b4-f59d-4e38-a1a4-82806ff41261-3&algo_pvid=e07e24b4-f59d-4e38-a1a4-82806ff41261&transAbTest=ae803_5&priceBeautifyAB=0
_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller
Back to top
View user's profile Send private message
Carrera RSR  



Joined: 08 Jan 2010
Posts: 2309
Location: Somerset, UK

PostPosted: Sun Feb 25, 2018 6:23 am    Post subject: Reply with quote

Similar on eBay too
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 931 Tech. All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group