View previous topic :: View next topic |
Author |
Message |
ideola
Joined: 01 Oct 2004 Posts: 15548 Location: Spring Lake MI
|
Posted: Sat Jul 18, 2009 2:05 am Post subject: Main Bearings, Round 2 |
|
|
I just got word from EBS that the second run of bearings from King arrived yesterday. EBS owes me three sets. So, anybody else need STD main bearings? If so, I can organize another group buy. Lemme know. _________________ erstwhile owner of just about every 924 variant ever made |
|
Back to top |
|
|
ideola
Joined: 01 Oct 2004 Posts: 15548 Location: Spring Lake MI
|
Posted: Tue Jul 21, 2009 11:27 pm Post subject: |
|
|
Bump. _________________ erstwhile owner of just about every 924 variant ever made |
|
Back to top |
|
|
!tom
Joined: 28 Aug 2006 Posts: 1934 Location: Victoria, BC Canada
|
Posted: Wed Jul 22, 2009 2:08 am Post subject: Re: Main Bearings, Round 2 |
|
|
ideola wrote: | I just got word from EBS that the second run of bearings from King arrived yesterday. EBS owes me three sets. So, anybody else need STD main bearings? If so, I can organize another group buy. Lemme know. |
It's awful soon after the 1st round.
I may or may not need a new set of bearings, and if so, I don't know what size. I'm planning on re-building a spare engine that I have, but I've got lots of other things on the go and there's no rush since the old one is still running strong.
So, until I crack the case, I've got no clue what I'll need. I was told the engine I picked up was freshly rebuilt, but I'm not counting on anything. It had been out of the car before though, since there was a SAE bolt threaded mostly in holding the bell housing on (the rest were metric)-- seeing that kind of workmanship doesn't inspire much confidence in me though. _________________ 78 924 NA
5-lug |
|
Back to top |
|
|
Nobbi
Joined: 24 Aug 2006 Posts: 1379 Location: Germany
|
Posted: Wed Jul 22, 2009 2:23 am Post subject: |
|
|
what`t that "Bump" thing for ? What does it mean ? _________________ NA 924 - april/1977- 4-speed-audi gearbox.
500.000 km with fun.....and new toy:Porsche 944 S2 Cabriolet.Other car Daimler c-class cabby,brandnew..Plus : DEUTZ 4005 tractor Built 1969 |
|
Back to top |
|
|
emoore924
Joined: 13 Apr 2004 Posts: 2815
|
Posted: Wed Jul 22, 2009 2:29 am Post subject: |
|
|
It moves the posting to the top of the list.
AKA "TTT" (take to top...) |
|
Back to top |
|
|
ideola
Joined: 01 Oct 2004 Posts: 15548 Location: Spring Lake MI
|
Posted: Wed Jul 22, 2009 3:45 am Post subject: Re: Main Bearings, Round 2 |
|
|
!tom wrote: | It's awful soon after the 1st round. |
Well, obviously, not everybody that needed them got them since we very quickly exhausted King's first run, and I even had to make arrangements to send three sets back to EBS as a favor to them to accommodate one of their European customers.
As I said, EBS owes me three sets, the next run is in, so I thought I'd open it up to see if there are any others in need. _________________ erstwhile owner of just about every 924 variant ever made |
|
Back to top |
|
|
morghen
Joined: 21 Jan 2005 Posts: 8884 Location: Romania
|
Posted: Wed Jul 22, 2009 8:11 am Post subject: |
|
|
i might be interested in a set....how much was it ?
i'll have to check what size i would need. _________________ https://www.the924.com |
|
Back to top |
|
|
Brockoli
Joined: 06 Feb 2007 Posts: 621 Location: Edmonton, Alberta, Canada
|
Posted: Thu Jul 23, 2009 3:37 am Post subject: |
|
|
so that is what happened to my set Its ok, I am not doing my rebuild till next summer as I mentioned to you. I will need a set of standard, thank you very much for going the extra distance to keep these cars on the road. _________________ '80 924 M471,Wideband O2, Full coilover susp,23/19 sways,Bilstiens,KLA Strut Brace,Roll Bar,Test Pipe,BBS RS, Willwood BBK
25% of a '87 944 Chumpcar http://straightpipe.ca/forums/showthread.php?t=2454
'79 924 Sebring Edition(Sitting) |
|
Back to top |
|
|
ideola
Joined: 01 Oct 2004 Posts: 15548 Location: Spring Lake MI
|
Posted: Thu Jul 23, 2009 3:50 am Post subject: |
|
|
IIRC the group buy price was $95 + shipping, and EBS had them retailing at $125 + shipping. _________________ erstwhile owner of just about every 924 variant ever made |
|
Back to top |
|
|
!tom
Joined: 28 Aug 2006 Posts: 1934 Location: Victoria, BC Canada
|
Posted: Thu Jul 23, 2009 4:38 am Post subject: |
|
|
When are you going to want to wrap this up? _________________ 78 924 NA
5-lug |
|
Back to top |
|
|
ideola
Joined: 01 Oct 2004 Posts: 15548 Location: Spring Lake MI
|
Posted: Thu Jul 23, 2009 5:29 am Post subject: |
|
|
I'm not in any particular hurry, it was primarily a feeler post...whatever you guys want to do is fine with me. _________________ erstwhile owner of just about every 924 variant ever made |
|
Back to top |
|
|
Joes924Racer
Joined: 03 Nov 2002 Posts: 11964 Location: Oregon, Denver Colorado native!
|
Posted: Thu Jul 23, 2009 12:43 pm Post subject: |
|
|
I have not checked my sources in a long time.. Are they hard to come buy
or what im thinking my guy can still get them std mains. _________________ 1979 porsche 924 Na
1980 porsche Turbo 931GT Replica
Have u ever driven a turbo. |
|
Back to top |
|
|
ideola
Joined: 01 Oct 2004 Posts: 15548 Location: Spring Lake MI
|
Posted: Thu Jul 23, 2009 8:00 pm Post subject: |
|
|
As far as I know, this is the only source for main bearings anywhere in the world at the moment, unless you get exceedingly lucky and find some NOS box sitting on a forgotten dusty shelf somewhere. It took us forever to get King to do a run of these. _________________ erstwhile owner of just about every 924 variant ever made |
|
Back to top |
|
|
Power Tryp
Joined: 16 Apr 2009 Posts: 434 Location: Calgary, Alberta
|
Posted: Sat Jul 25, 2009 3:51 pm Post subject: |
|
|
I'd be happy to step in for one set of std. The engine I'll be putting in it this winter was already rebuilt but I will want to rebuild the original just to have on hand.
Tryp _________________ Melanie - 1980 931
NoName - 1980 931 (seeking rebuild)
Green tartan interior, you don't see that on a Civic. |
|
Back to top |
|
|
smither
Joined: 03 May 2009 Posts: 26 Location: Pontyclun, Wales, UK
|
Posted: Sun Nov 08, 2009 10:58 pm Post subject: |
|
|
I'm going to pull and rebuild my engine next year. I've a receipt in the service history for a Volkspare recon engine in 1992, and i know the car has done about 40,000 miles since then.
I should really replace the main bearings next year so i will need a set if the timing is right. I may be very lucky and find the mains in good condition as they should be half the age of most. The only problem is i can't commit to a size until i pull and strip the engine as the crank might have been reground in the recon process.
The mains are the last of the NLA parts i am missing (i think) as i managed to get peformance valve springs from Aus and ARP conrod bolts form EBS.
Thanks to the forum members who organised the group buys originally. _________________ 1978 NA 924 dogleg
1971 Triumph Gitfire with ashley hardtop
2000 MGF (for the wife) |
|
Back to top |
|
|
|