924Board.org

Hi and welcome to the 924 Board.
I'm about 50 min into the video over multiple chuck of 5 to 10 min at the time. My first comment would be long, way too long.
I will finish it, but I have questions ...

It was LONG, I only had time for 15 min and waited for your explaination why you prefered the earlier cars pre ´80.

Yeah, it ended up being a bit long!

We'll try to keep the coming episode ...

I'm going to have a listen on one of my morning runs. Thanks for the link
Please do, and please let me know what you think!

Me and a friend recently decided to start a podcast where we sit down and discuss a specific car model.
Since we both have a deep-rooted love for the 924 we decided that our first episode would be a ...

Hello,

that relay is factory solution for the hot-start issue.I am not sure how it works but it builds up fuel pressure in the lines.

Nobbi
Thanks! The engine starts fine without it (The ground ...

Yesterday I found this relay in the battery box. The wiring going to it looks like it could have been done at the factory, but what does it do? The car has been on SORN since 2008 and I bought it a co ...

In my case, it was the stalk itself. Despite my attempts to clean it, it still ha a bad connection. I've dismantled it and will try fixing it before ordering a new one.

I forgot about that! I chang ...

In my case, it was the stalk itself. Despite my attempts to clean it, it still ha a bad connection. I've dismantled it and will try fixing it before ordering a new one.

That's odd, my car has the opposite issue: Indicators work, and the hazards don't. They haven't worked in at least a year.
Ah, the joy of old cars. Have you checked the hazard switch?

My indicators don't work, nothing happens when flicking the switch. If i turn them on with everything off, the parking lights come on on the corresponding side, as they should. I've cleaned up the sta ...

i think the car has the stock steel rims on, very rare item here in Germany.
These were Standard but most customers went for the Aluminium wheels.
The same is true for Sweden!

Can we get a detailed shot of the torsion bar access hole your cars appears to have right in front of rear wheel ?
I'll snap some photos when I get the chance. Do you want pictures of the hole itself ...

Yeah, looks cool.
What are your plans for it?
First of all, getting it to work properly. After that I'm probably just going to enjoy it. I've nicknamed the car "Project old man spec", sinc ...

Am I right in thinking they should switch on when pulling the stalk towards the wheel, and turning back off when repeating the same motion?

yes, pulling the stalk until it clicks will either tur ...

I've done some digging, and as far as I can make out, there is no flash-to-pass on the 924. What's likely my issue is the high beam switch itself. Hopefully I'll get some time to look into it this wee ...