924Board.org

OK, this request might seem a bit weird, but hear me out.

1. I have a complete 2.0 NA engine sitting in the engine stand.

2. I can get hold of a 944 complete (minus engine) in horrid shape.
...

Hey gang, I just picked up a set of 4 lug ATS phone dials, and I’m looking for some specs on them. I know they’re 4x108 and 6jx15 but the technical website says they’re et33.8, but there’s a m ...

Hey all, does anyone have the specs and sizes on the turbo fittings? I need to know what size the the filter housing to turbo outlet is, the turbo oil inlet size, the turbo oil fitting size fitting si ...

Hey what ever happened to this project? I know the engine ran on the duratec head but thats the last I saw of it

Hey can anyone shoot me a base tune for my ms2 931? My afr and ignition tables are a bit out of whack, it's my first time tuning with efi so any help is appreciated

Hey all, finishing up my 931 swap, I just wanted to know if anyone has the resistances for the stock 931 temp sensor? I'm using a megasquirt 2 and it lets me calibrate my temperature sensor (which is ...

I've been running with the crank venting to atmosphere for almost two years now. If your engine is in good health, its no big deal...but if you have a worn out engine...well its not a good idea

...

Hey all, dumb guy here, I managed to cut my aos line (the one with the big banjo fitting) and I was wondering if anyone here has deleted their aos/ done something different with it? I'd like to go dry ...

There are companies who repair&upgrade your clutch disk.
Take the old one to them and tell them to mod and repair that one.

Old one is done in, there are a bunch of broken fingers on the press ...

Hey all, I am knee deep in a 931 engine swap and I've been stuck for almost 3 weeks now buying and returning clutches, and I need some HELP. I have a 1982 931/2, I am trying to buy a clutch for it, a ...

Hey all, I am dealing with a fun little issues in that I bought a 944 clutch for my 1982 924 turbo s2, I went looking for the right clutch afterwards and found out that apparently there is a clutch th ...

I was really just hoping to run an external tank using the original oil pump, basically have the oil pan pick scavenge to a tank, and then draw from the tank to feed the oil system. Ii think that migh ...

Hey all, was looking at my oil pump and noticed this bolt and what appears to be a freeze plug, I was wondering if I could potentially use these as an outlet and inlet to run an external oil tank or p ...

Hey all, I'm looking to make a fiberglass gtr/gtp dash replica, the plan was to make a foam plug, coat it and then I could make a couple and potentially sell them down the line, BUT, I don't know any ...

Hey gang, I'm in the process of 931 swapping my 944 (which is not the point of this thread) and I need to get the engine mount brackets off of the body of the 931, has anyone done this before? What's ...