924Board.org

Power window diagram is page 97-21 of Vol 4 - might yours not be complete? It's before the MY78 diagrams.

Do you have the hardcopy or a scan? I think the scan is missing a lot of those pages...

...

Maybe some reading glasses and brighter lights? Worked for me!! Yeah, none of us is getting younger...

Pelican used to have some wiring diagrams online, but I think not all years, and they may ...

Yup, that Nippondenso part is a controller for the AC, turns the compressor on and off based on the temp of the evaporator.

That stuff all looks just like the AC on my '82 (really, '81) Turbo... w ...

Update: went back with a label maker and started labeling all of the random wires around the car, and I was able to confirm the yellow/white wire is for the aftermarket speakers.

I also took better ...

Oh yeah, very not factory with that black/red wire... I was envisioning something striped, not a dual wire like that.

Agreed that the others look like old speaker wiring, quite suitable for ditchin ...

Hmmm, large red and black wire... the only thing I can think of at the moment for a large red and black wire remotely related to the interior might be power windows; I don't remember if your car has t ...

Hey guys!

I'm back with more mystery questions. These should be easy for you guys but for me, am confused. I started tearing out the glovebox, carpet, and the kickpanel. It looks semi factory semi ...

Alrighty, I'm back with some good news and some bad news.

Good news: I've installed all new fuses and cleaned up the contacts (at a later date I'll rip everything out and recrimp because I need to ...

Power windows is the one hanging on its own.

Alright, while I'm chewing over my options with the brakes, I'm bouncing back to this side quest.

Facebook marketplace is a dangerous place and I ...

The differing rod lengths between the 944 and 924 master cylinder and booster make it a swap requiring fabricated spacers. If you try to use the 944 booster it interferes with the throttle cable loca ...

You can get a brake hone for your drill at a decent auto parts store! Easy-peasy...

I can barely draw a straight line, I'm not sure how successful I would be at honing everything out properly XD Bu ...

Well, I mean all a rebuild encompasses is replacing seals, cleaning, and hopefully no corrosion to deal with (which would require at a minimum re-honing the bore, possibly replacing the piston if dama ...

I have gone dumpster diving in the depths on here for more info on the mc, and along the way I managed to find a PDF of the Porsche Workshop manual, and the absolute rage of all there being on the mc ...

In-tank fuel pump wires. Someone has replaced it with a strainer on your car so you no longer have an in-tank fuel pump - if you did have one then that big hex where the fuel outlet hose exits the ...

Your mystery items look to be all from the AC system being removed.

Wires for compressor, wires behind the headlight for the pressure switch by the drier, and a cut hose.

Awesome, thanks Vaughan ...