924Board.org

top of brake pedal

I was looking at EZ2wire ready made harnesses years ago. Might be still around.

Low fuel pressure will not allow spray from injectors but if both pumps are correct type then pressure should not be a problem
Likely a stuck valve that is supposed to move with the flap arm if it ha ...

similar issue- rotor button was wrong resistance

on housing the rear water hose comes off the back of motor, looks like a nail head

I have an NA with spiderwebs 4 bolt and fits fine, carpet is a bit tight but fits

no, all good after.
Removing HT lead from coil is a must, heard stories of engine starting when others have tried this.
I also used loctite when replacing

Having an auto NA I couldnt put in gear and undo mine either.
The work around (not recommended) for me was remove the coil HT line to dissy and using a long breaker bar.
Lock the breaker bar against ...

core plugs?

a host site is required here to post pics. if the host site has folded or the user who posted no longer uses it, the pic is either gone or greyed.

would say so, wrong wire on fuse 5 or 6

do you have a/c?

Check rear CV's

The coil's spark is controlled by the TIU from the distributor pickup, unless you have points there is no direct cable from dist to coil

I think Pelican.com have a schematic for early models but best to get a Haynes manual