924Board.org

No dice, jumped it and got no response. Looks like my car's wearing trashbags to work tomorrow.

Edit: I'm getting the feeling I may have dislodged a wire in the back, what are the odds of this?

Thanks, but help me out as I'm really bad with electrics. How do I jump it?

I was working on the aux. fuse box. Problem now is that I think when I took out the fuse for the power windows the relay died. How the hell do I jump this to close my windows before it rains?

I was trying to find the fuse for my fuel pump earlier today, as the pump ran regardless of whether or not the fuse that it's supposed to rely on was in.

Whatever, that's not what's important.

F ...

I'm replacing the fuel pump and filter in my car, but here's the tricky thing, the fuse that should be the fuel pump... isn't.

Everything I've seen says it's fuse #2 on the smaller fuseboard, so I ...

Lug nut wrench + jack stand wrench. I bet that jack has a thing with a hole through it you can stick that hook to turn it.

Alternately, it's for tightening lug nuts while twisting the earrings off ...

My car finally finds its way onto the boards!

http://ft.mirror.waffleimages.com/files/a1/a1aad474ce6f0e7b82f67371cade6f90ceb77d7e.jpg

Poor thing, with its rust and its old and broken parts. I'd ...

Out of curiosity I did a search on any recalls for the 924S, and it turns out there was a safety recall on the fuel system dated 1990.

http://www.cars.com/go/recalls/rclMain.jsp?year=1987&mkid= ...

I wouldn't scavenge a thing. I'd keep the 924S as is, and then go buy this:
http://cgi.ebay.com/PORSCHE-parts-924S-944-3-0-liter-8-valve-Race-Engine_W0QQitemZ160208040021QQihZ006QQcategoryZ33615QQssP ...

The interesting part about this is that the racing didn't hurt anybody, it was just some guy who drove through the crowd as they walked out into the street for whatever reason (a better view?).

The exterior door handle is removed and replaced from the outside of the car. The linkage is disconnected for removal and reconnected for installation of the door handle through the the hole in the d ...

Fantastic, thanks.

I've looked at little instructions here and there on how to remove the door linkage (for the external handle) and they all say to pry open the plastic link on the linkage.

How the hell do I do that ...

Well I've got a pair of ramps, but the jack gave me slightly better access. The problem is that the starter motor bolts are super tight and I just don't have the room to sneak a breaker bar under the ...

I've got this shnazzy new clutch slave cylinder in my hand that I need to get in my car. This is an easy job... or would be if I could just get the car a biiiit higher so I can pop the pretty stuck s ...