924Board.org

Mine rests between second and third in neutral, although the sloppy bushings make it easy to accidentally grind first when downshifting from forth - I've found the best thing to do is not to pull towa ...

That's good news; it jibes with a follow-up email from CMS that mentioned a reproduction may be in the works. No thread-jack at all because it seems the first gear parts are the most needed and the mo ...

I'm not sure on the bore either; maybe that was a change from the early 924s. RockAuto will usually give you bore sizes on brake parts if the manufacturer lists one, and I'm seeing 13/16 (20.6mm) and ...

I looked around a little bit for one for my car a while back, but didn't see anything out there. Obviously mine's a year newer and a 931, but it does have a 23mm bore. I didn't dig much because mine h ...

I took my in-tank pump apart and messed around with it a bit, but I'm not sure I could get it to function again, or if it's even worth trying. It was very badly gunked up though. If you're trying to g ...

I emailed both EBS and CMS; I didn't hear anything from EBS, but CMS got back to me promptly and seemed pretty helpful. Their response:

"Hi William, thank you for contacting us. Low gear grin ...

Hopefully I can help, assuming you haven't found any measurements yet. I measured mine and took some pictures; I haven't got around to uploading those yet though. The protruding square measures 45x55m ...

I would consider doing mine but honestly, I just don't have the time.

The $1,500 they want to do it properly is worth it to me just for the time it allows me to go out and do other stuff or work on ...

I can only gather a little of what you do Vaughn, but I think I'm jealous too... I'll have to check in with EBS. It's definitely a job better left to professionals, but I've gone through one transmiss ...

Nope, it's right there "(on efi)" My bad!

Mine's a champ on cold starts - I'm really not sure how or even if it could be improved on. Hot starts are another story: in the half hour to an hour window, it can take up to thirty seconds of cranki ...

Keep us in the loop on how this turns out, and I will probably contact California Motorsports about parts for my G31 - especially the unobtanium first gear. Mine's just good enough to function, but ba ...

When I was getting my car going, I used a jumper wire in place of the relay until I was able to get a good relay. The two terminals that need to be connected are the one that's 90 degrees off from all ...

I've had very mixed luck with RockAuto's part matching system; sometimes I find things I'd never have expected to get from them, sometimes it spits out garbage. The 924 is just the kind of car it'll b ...

That's kind of funny, when it's not you anyway! I would never have thought of that. In fact, I didn't realize the distributor was mounted to something other than the head itself until I was messing ar ...