924Board.org

Call Newman in the UK, they will certainly help you.

Or you could buy a newmans camshaft from the UK. They are billet ground cams for around 250euro, very cheap compared to pipercams or webcams camshafts.

Thats very cool. Can you simply charge it with the 13.8v coming from the alternator or do you need to build in a special charger that limits the amperage? (so the cells don't explode)

It genuinely looks like an 80th race car, form follows function and the end result is impressive

+/-160hp supercharged NA:

Did a 1500-6000rpm run in 3d gear with the new intercooled setup to measure IAT's. The bright colored lines in the figure below are the old (no IC) setup, the gray-ish l ...

Was that on rollers?

remove 15% due to alltitude=78whp, and then remove some power from higher ambient T aswell (dont know the difference here, but dutch should be sea level, or lower

). We d ...

For comparison: Dutchpug dyno'ed two quite high milage stock 924 2.0 NA euro cars on his Dynapack dyno and both produced 92whp. (Yes, I am aware you are not supposed to compare results from different ...

Very nice indeed, even at 0.8bar it flies. I'm very curious about the results at full boost

A good electronic boost controller will help with the boost buildup, however I suspect you already kn ...

Very nice, the 2.0 NA turbo setup will live on

Any plans how to fix the clutch issue? (as it was one of the reasons you went for a 968 setup)

Thanks, I used o have a mondeo 1.8 fuel rail but ruined it when I tried to weld brackets to it using a stick welder. The welds where porous so it developped a leak

Replacing the rail is number ...

I converted my vacuum opperated bypass valve to a throttle driven vacuum valve. The vaccuum actuation didn't work as expected so it was ditched after a couple of runs. Now I made a pull-pull linkage s ...

Don't stop now you are at 90% of the project. Stop working on it for a couple of weeks and give it some time.

About the clutch dragging. Did you use a brand new nice and shiny clutch plate? Mine wa ...

I just found out why my china fan was blowing so little air, I connected it the wrong way round

Now it is running in the right direction it is less shitty than before but I'm still going to mo ...

Good old dutch traffic jams indeed, on a sunday afternoon

Some guy crashed and skidded across 4 lanes so the police shut 4 of the 5 lanes to do an accident analysis. Even though our road's are ...

Drove the 924 yesterday. The IC seems to be doing it's job perfectly as inlet temperatures dropped at least 40dg. The bypass valve however does not function perfectly yet, needs some tuning.

The ...