924Board.org

Oh, i read it. Just wanted to stir Morghen up a bit lol !

Thanks

What made you decide the weltmeister front springs over a coil setup?
Mainly because I've been running the Weltmeister 200lbs front lowering springs for about 10 years and was very happy wi ...

Suspension upgrade to front lowering Weltmeister 250lbs springs and rear 25.5 torsion bars.

https://live.staticflickr.com/65535/52839458184_ebc5c57923_b.jpg

FYI if you are going for a turbo rebuild, in addition to the newer/better design compressor wheel, there is also a newer/better design and much lighter turbine wheel with shaft.

This?: http://www.924board.org/viewtopic.php?t=29582&highlight=944+fuel+tank&sid=51132f98b2456164bcfe70ad6d391b47

Great, thanks for the update

Any progress or update on this 924 GTS part? I really want one lol

https://live.staticflickr.com/65535/51253914110_26c0d9a594_z.jpg

I think that never fails is law of nature, whatever tool you don't bring is the one you will need

Good luck on your trip

Hi and welcome to the 924 Board.
I'm about 50 min into the video over multiple chuck of 5 to 10 min at the time. My first comment would be long, way too long.
I will finish it, but I have questions ...

Here's a list of general mods and rebuilds I want to do:

-Engine Rebuild (improved internals)
-Upgraded water-cooled turbo and turbo manifold
-Add intercooler and piping
-Upgrade radiator
-5 l ...

Hi All
I am in the process of rebuilding my race engine and have selected a cam that will result in peak power at ~ 7500rpm...Cheers

As far as I know, the biggest restriction on 924 N/A for more p ...

Both were shot on my car when I bought it.

If you have more work to do in the area, like flushing and cleaning rust out of the full tank, you should consider removing the tranny out.

Good luck

If I remember correctly, #2 is a metal trip.
#3, 4 and 5 is the 3 pieces rear spoiler. You can find used one on forums or ebay. Can also be replace (direct bolt-on) by the 944 rear spoiler which is ...

924 turbo cam are all the same, and if I remember correctly all 924 cam are the same, NA and turbo.

Is the same screw Allen on one end and flat slot on the other?
No, they are size indicator notch, page 42